We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Universal Drill Guides
Single size drill guide according to plate/screw size. Instrument is clearly etched with the pilot drill size and screw size.
In stock
SKU
UDG-GP
Spring loaded tip of drill guide allows drilling in either neutral or loaded position (for DCPs and for DLPs). Can replace the LNDG for DCPs, and is required for placing a screw in compression in a DLP.
Has a standard drill guide at the other end, equivalent to the clearance drill size, so can be used to guide a tap, or for a clearance drill during lag screwing etc.
UDG20 – for 2.0mm screws. For load and neutral positioning of ø1.5mm drills and tissue protector for ø2.0mm tap.
UDG24 – for 2.4mm screws. For load and neutral positioning of ø1.8mm drills and tissue protector for ø2.4mm tap.
UDG27 – for 2.7mm screws. For load and neutral positioning of ø2.0mm drills and tissue protector for ø2.7mm tap.
UDG35 – for 3.5mm screws. For load and neutral positioning of ø2.5mm drills and tissue protector for ø3.5mm tap.
